News

OPTICUM 9500 HD PVR 2CI 2CX E PLUS A99435 is a cheap digital receiver for satellite TV channels broadcast in HD resolution. It allows to receive FTA channels and programs encrypted in CONAX or other systems (after installing additional CA module connected to CI slot). Front panel is equipped with alphanumeric display and two LEDs showing operation status. The receiver has both digital and analog outputs.

The receiver has ready-to-use channel list, the user can additionally configure 32 favorites. Menu languages include English, Polish, French, German, Hungarian, Czech, Slovak.

Time setting can be done manually or automatically from the DVB stream. There is option to change the daylight saving time.

The receiver allows to record programs onto external USB memory device. Both a flash memory and 2.5″ HDD can be used. The receiver supports not only FAT32 file system, but also ext2 (Linux). The user can examine the performance of the connected flash memory or hard drive. Readings below 25 Mbps can result in poor recording quality and no possibility of using Timeshift function.

Extended timer allows to specify the time, date and channel to be switched on etc.

• Standard: MPEG DVB-S / DVB-S2 (H.264) HD
• Channel memory: up to 8000 entries (TV and Radio channels)
• Multi-language OSD Menu
• Quick switching between channels
• User-defined channel lists
• User-defined Favorite list
• 8-color OSD
• Picture In Graphic (PIG)
• EPG
• Support for subtitles
• Teletext supported by VBI and software
• Parental lock (channels/programs)
• Video games
• Digital Audio S/PDIF (optical and coaxial)
• DiSEqC 1.0, 1.1, 1.2 and USALS control
• HDMI HD Video/Audio output
• PIP
• Firmware update via LAN
• One USB 2.0 for data transfer and second for power supply (HDD)
• VFD display
• Real-Time-Clock
• LAN connection (10/100 Mbps Ethernet)
• Time Shift
• Video recording
• Simultaneous recording of two programs and watching another one (from one transponder)
• Recording of one program and TimeShift of another (from one transponder)
• Recording of one program and PIP of another (from one transponder)

SYSTEM CPU 400 MIPS Flash 8 MB DDR SDRAM 1024 + 512 MB

TUNER LNB IN F-female SAT IF Loop F-female Input level
-65 to -25 dBm Polarization Vertical: +13…14 V Horizontal: +18…19 V Max load
500 mA DiSEqc control
1.0, 1.1 1.2, USALS Demodulation QPSK, 8PSK Input symbol rate
2-45 Mbps, Convolution Code Rate 1/2, 2/3, 3/4, 5/6, 7/8 and Auto

POWER Supplying voltage
100-250 VAC, 50/60 Hz Power consumption
40 W max.

MPEG TS A/V DECODING Data stream formats MPEG-2, H.264 Input transfer rate
Max. 120 Mbit/s Aspect ratio
4:3, 16:9, Letter Box Video resolution
Max. 1920X1080i Video standards 720*576[PAL] / 720*480[NTSC] Audio decoding
MPEG-1 Layers 1/2, Dolby AC-3 Audio modes Left / Right / Stereo Audio sampling
32, 44.1 or 48 kHz RF modulator
-

CONNECTORS TV-SCART Video CVBS/RGB – output Audio L/R – output VCR-SCART Video CVBS – output Audio L/R – output Video CVBS, RGB – input
Audio L/R – input
Cinch (RCA) A/V 1 x YPbPr – output Video CVBS – output Audio 2 x L/R – output S/PDIF Coaxial and optical output, Digital Audio or Dolby AC-3 Bit Stream RS-232C 115.2 kbps 9 Pin D-sub USB USB 2.0 HDMI VER1.2 Type A

PHYSICAL SPECS
Dimensions [W*D*H] 360 x 266 x 65 mm Weight 2.5 kg Operating temperature range
0…45 °C Storage temperature range -10…+70 °C Operating relative humidity range
5…95 % (no condensation or drops)

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.